29
English
Schedules automatic shutdown of the projector.
Standby Settings
VGA Out
Selecting "On" enables the function. The projector can
output a VGA signal when it is in standby mode and the
VGA IN (or VGA IN 1) and VGA OUT sockets are correctly
connected to the devices.
Enabling this function slightly increases the standby
power consumption.
Network
Enables/Disables the network function.
DC 5V Out
Selecting "On" enables the function. Both micro USB cable
inside the projector and the DC 5V out port/USB A port (if
available) on the back of the projector can output 5V
power when it is in standby mode.
Enabling this function slightly increases the standby
power consumption.
HDBaseT IR Carrier
Use this function to enable HDBaseT IR Carrier.
Network
Status
Displays the network connection status.
DHCP
Select On to allow the projector to obtain an IP address
automatically from your network. Select "Off" to manually
assign IP, Subnet Mask and Gateway configuration.
IP Address
Set an IP address or display IP address provided from DHCP
server when DHCP is set to "On".
Subnet Mask
Set subnet mask number or display subnet mask number
provided from DHCP server when DHCP is set to "On".
Apply
Select "Yes" to apply the changes made in network
configuration settings.
MAC Address
Displays MAC address.
