Acer AW170h F1 Скачать руководство пользователя страница 151

Страница: 151 / 160

135

Macro hotkeys.

•

Macro Hotkeys: Click this item to display the macro hotkey pop-up
submenu. The hotkeys include the following:
•

•

•

•

•

•

•

•

•

•

•

<F1>

•

•

<Pause>

Options

The options menu allows you to configure the settings for Hotkey,
Preferences, Full-Screen Mode, OSD UI Style and
Keyboard_Mouse_Hotplug for your console redirection.

Hotkey settings

This feature allows you to configure Hotkey settings for your console
redirection.

•

Set Hotkey: Click this item to configure your hotkey settings for
your console redirection.

•

The Hotkey Settings screen displays the following information:
•

Hotkeys: Hotkeys: <Ctrl> + <1> to <Ctrl> + <7> are displayed
on the right side of the screen.

•

Actions: Click a hotkey to show the action corresponding to
this hotkey on the left of the screen.

•

Keyboard Monitor: Click this item to enable keyboard monitor
support.

•

Assign: Click a hotkey and select an action from the actions menu,
and then click Assign to assign the action to the hotkey.

•

Start: After an action is assigned to a hotkey, click Start to execute
the command and complete the assignment.

•

Stop: After an action is assigned to a hot key, click Stop to cancel

Содержание AW170h F1
































































































































































Результаты поиска

Содержание AW170h F1

Отзывы:

Acer AW170h F1, Руководство пользователя, Страница: 151 / 160

Результаты поиска

Содержание AW170h F1

Отзывы: