11
Enjoying analog and digital TV
There are a few steps to perform when you first use your TV.
Getting started watching your TV
1. Setup
a
Connect the power and antenna cable to the TV. See “Basic
connections” on page 13.
b
Insert the batteries in the remote control. See “Setting up the remote
control” on page 8.
2. Power
a
Press the touch-sensitive power button beneath the screen OR press the
power button or channel up/down button on the remote control.
b
Wait a few seconds for the TV to warm-up.
3. Installation guide
The first time you switch on the TV, you will be asked to select the language
and scan for channels.
Press the OK key to begin the setup process.
Tip: You can also adjust these settings using the front control panel. See
“Front and side panels” on page 6.
a
Select the setup language you prefer.
b
Please select the correct country for signal reception.
c
Select Home mode.
d
Ensure that is antenna cable is connected correctly before proceeding.
e
Scan for digital channels and analog channels.
f
Setup is now complete. You are ready to begin watching TV.
1
1
2
3
4
