5
Acer AT110 F2 Specifications
Technical specifications
PCIe
®
specifications
The primary I/O bus for the main board is PCIe Gen2. The following table lists the characteristics of the
PCI-E bus segments. Details about each bus segment follow the table.
NOTE:
The signaling bit rate of PCI Express is 2.5Gbit/s one direction per lane for Gen 1 and 5.0Gbit/s one
direction per lane for Gen 2.
Expansion
slot
Number
Type
Bus width
1
Voltage
Connector
Location
Length
PCIe x16
1
PCIe Gen2 x16
3.3V
x16
Onboard
Full height
PCIe x8
1
PCIe Gen2 x4
3.3V
x8
Onboard
Full height
PCIe x4
1
PCIe Gen2 x2
3.3V
x4
Onboard
Full height
PCI
1
PCI
32 bit
3.3V
PCI
Onboard
Full height
NOTE:
1. Indicates the number of physical electrical lanes running to a PCIe
®
connector.
2. Default bus assignment (in decimal). Inserting cards with PCI™ bridges may alter the actual bus
assignment number.
3. Slots are enumerated differently based on the operating system. Microsoft® operating systems
enumerate Device ID by bus starting from the lowest bus to the highest.
Onboard storage specifications
Item
Description
Controller
Intel C202 onboard controller
Simultaneous drive transfer
channels
6 onboard SATA ports
Max throughput per channel
3 Gb/s
Data transfer method
•
Non-RAID mode
•
RAID mode
Drive type supported
Serial ATA
RAID levels support
•
RAID 0, 1, 10, 5 (Intel software RAID)
•
RAID 0, 1, 10 (LSI software RAID)
NOTE
: Intel software RAID only supports Windows OS
LSI software RAID available about 2011 Q1
RAID function support
Supports multiple logical volumes
Setup through ROM based Array Configuration Utility Installation
scripting support
NOTE:
This controller does not support hot plug or LED functions
RAID OS support
•
Windows Server
®
2008
•
Windows Server 2008 R2
•
Windows Server 2003
•
Red Hat Enterprise Linux 6