Acer Aspire Z3620 Скачать руководство пользователя страница 131

Страница: 131 / 153

121

Intermittent Problems

Intermittent system hang problems can be caused by variety of reasons that has nothing to do with

a hardware defect, such as: cosmic radiation, electrostatic discharge, or software errors. FRU

replacement should be considered only when a recurring problem exists.

When analyzing an intermittent problem, perform the following:

1. Run the advanced diagnostic test for the system board in loop mode at least 10 times.

2. If no error is detected, do not replace any FRU.

3. If an error is detected, replace the FRU. Rerun the test to verify that there are no more errors.

Undetermined Problems

The diagnostic problems does not identify which adapter or device failed, which installed

devices are incorrect, whether a short circuit is suspected, or whether the system is inoperative.

Perform the following procedures to isolate the failing FRU (do not isolate non-defective FRU).

NOTE

Verify that all attached devices are supported by the computer.

NOTE

Verify that the power supply being used at the time of the failure is operating correctly.

(Refer to Power On Issues).

1. Remove power from the computer.

2. Visually check them for damage. If any problems are found, replace the FRU.

3. Remove or disconnect all of the following devices:



Non-Acer devices



Printer, mouse, and other external devices



Battery pack



Hard disk drive



DIMM



CD-ROM/Diskette drive Module



PC Cards

4. Apply power to the computer.

5. Determine if the problem has changed.

6. If the problem does not recur, connect the removed devices one at a time until failing FRU is

found.

Содержание Aspire Z3620


























































































































































Результаты поиска

Содержание Aspire Z3620

Отзывы:

Бренды по названию

Популярные бренды

Acer Aspire Z3620, Руководство по обслуживанию

Результаты поиска

Содержание Aspire Z3620

Отзывы:

Бренды по названию

Популярные бренды