![background image](http://html.mh-extra.com/html/acer/aspire-t130/aspire-t130_service-manual_6093030.webp)
23
Chapter 2
IDE Channel 1 Slave
Lets you configure the hard disk
drive connected to the slave port
of IDE channel 1.
To enter the IDE Channel 1 Slave
setup, press
e
.
The IDE CD-ROM is always
automatically detected.
(Show the Status:)
None
HDD or CD-ROM Number
Drive A
Allows you to configure your
floppy drive A.
None
360K, 5.25in
1.2M , 5.25 in.
720K , 3.5 in.
1.44M, 3.5 in.
2.88M, 3.5 in.
Video
This item specifies the type of
video card in use. The default
setting is VGA/EGA. Since current
PCs use VGA only, this function is
almost useless and may be
disregarded in the future.
EGA/VGA
CGA 40
CGA 80
MONO
Halt On
This parameter enables you to
control the system stops in case of
Power On Self Test errors
(POST).
All Errors
No Errors
All ,But keyboard
All ,But Diskette
All ,but Disk/Key
Base Memory
Refers to the portion of memory
that is available to standard DOS
programs. DOS systems have an
address space of 1 MB, but the
top 384 KB (called high memory)
is reserved for system use. This
leaves 640 KB of conventional
memory. Everything above 1 MB
is either extended or expanded
memory.
N/A
Extended Memory
Memory above and beyond the
standard 1 MB (megabyte) of base
memory that DOS supports.
Extended memory is not
configured in any special manner
and is therefore unavailable to
most DOS programs. However,
MS Windows and OS/2 can use
extended memory.
N/A
Total Memory
Total base, and extended memory,
and I/O ROM 384KB available to
the system.
N/A
Parameter
Description
Option
Содержание Aspire T130
Страница 13: ...6 Chapter 1 Mainboard ...
Страница 56: ...Chapter 3 49 Disassemble Flow Chart ...
Страница 94: ...87 Chapter 6 Aspire T130 Exploded Diagram ...