manualshive.com logo in svg

Acer Aspire S3 MS2346, Руководство по обслуживанию, Страница: 141 / 194

Поделиться
Скачать
Acer Aspire S3 MS2346 Скачать руководство пользователя страница 141

Troubleshooting

4-11



Drag the slider to 50. Confirm that the volume is not muted.



Click Mixer to verify that other audio applications are set to 50 and not muted.

6.

Navigate to Start 

 Control Panel 

 Hardware and Sound 

 Sound. Confirm that 

Speakers are selected as the default audio device (green check mark).

NOTE:

NOTE

:

If Speakers do not show, right-click on the 

Playback

 tab and select 

Show Disabled 

Devices

 (clear by default).

7.

Select Speakers and click Configure to start 

Speaker Setup

. Follow the on-screen 

prompts to configure the speakers.

8.

Remove any recently installed hardware or software.

9.

Restore system and file settings from a known good date using 

System Restore

.

10. If the issue is remains, repeat step 9, selecting an earlier time and date.

11. Reinstall the Operating System.

12. If the issue is still not resolved, refer to the 

Online Support Information

 on page

9-3

 

Содержание Aspire S3 MS2346



































































































































































































Отзывы:

Нет отзывов