manualshive.com logo in svg

Acer Aspire AM5610, Руководство по обслуживанию

Поделиться
Скачать
Acer Aspire AM5610 Скачать руководство пользователя страница 23

Chapter 1

17

Feature

•  A-Link Xpress II interface to the North bridge 
•  1/2/4-lane A-Link Xpress II interface
•  Supports PCI rev. 2.3 specifications
•  Supports up to 6 master devices 
•  Supports 40-bit addressing 
•  Supports interrupt steering for plug-n-play devices 
•  Supports concurrent PCI operations 
•  Supports hiding of PCI devices by BIOS/hardware 
•  Supports spread spectrum 
•  5 OHCI and 1 EHCI Host controllers to support 10 USB ports 
•  All 10 ports are USB 1.1/2.0 compatible 
•  Supports ACPI S1~S5 
•  Supports legacy keyboard/mouse 
•  SMBus Rev. 2.0 compliant 
•  Supports programmable level/edge triggering on each channels 
•  Supports serial interrupt on quiet and continuous modes
•  Supports LPC based super I/O and flash devices 
•  Supports two master/DMA devices 
•  Supports TPM version 1.1/1.2 devices for enhanced security 
•  Supports SPI devices 
•  Supports four SATA ports, complying with SATA 2.0 specifications
•  Supports both AHCI mode and IDE mode 
•  Supports advanced power management with AHCI mode
•  Single PATA channel support 
•  Support PIO, multi-word DMA, and Ultra DMA 33/66/100/133 modes 
•  32x32 byte buffers on each channel for buffering 
•  Swap bay support by tri-state IDE signals 
•  Supports Messages Signaled Interrupt (MSI) 
•  Integrated IDE series resistors 
•  Supports for both audio and modem Codecs 
•  Compliant with AC-97 codec Rev. 2.3 
•  6/8 channel support on audio codec 
•  Multiple functions for audio and modem Codec operations 
•  Bus master logic 
•  Supports up to 3 codecs simultaneously 
•  Supports SDIF output 
•  Separate bus from the HD audio
•  ACPI power management timer
•  ACPI specification 3.0 compliant power management schemes 
•  Supports C2, C3, C4
•  Supports S0, S1, S2, S3, S4, and S4

Item

Specification

Содержание Aspire AM5610


















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды