28
13.
Remove the one screw (A) securing the card reader board to the lower case.
14.
Remove the card reader board from the lower case.
Note:
Circuit board > 10cm
2
has been highlighted with the red rectangle as shown in the figure
above. Please detach the circuit board and follow the local regulations for disposal.
Removing the Bluetooth Module
1.
See “Removing the Battery Pack” on page 5.
2.
See “Removing the Lower Cover” on page 6.
3.
See “Removing the Lower Cover” on page 6.
4.
See “Removing the Optical Drive Module” on page 7.
5.
See “Removing the DIMM” on page 7.
6.
See “Removing the Hard Disk Drive Module” on page 8.
7.
See “Removing the SSD Module” on page 9.
8.
See “Removing the RTC Battery” on page 9.
9.
See “Removing the Keyboard” on page 12.
10.
See “Removing the WLAN Board Module” on page 13.
11.
See “Separating the Upper Case from the Lower Case” on page 14.
Step
Size (Quantity)
Color
Torque
1
M2 x L4 (1)
Black
1.6 kgf-cm