14
4.
Remove the one screw (A) on the WLAN board to release the WLAN board.
5.
Detach the WLAN board from the WLAN socket.
NOTE:
When attaching the antenna back to the WLAN board, make sure the cable are arranged properly.
Separating the Upper Case from the Lower Case
1.
See “Removing the Battery Pack” on page 5.
2.
See “Removing the Lower Cover” on page 6.
3.
See “Removing the Lower Cover” on page 6.
4.
See “Removing the Optical Drive Module” on page 7.
5.
See “Removing the DIMM” on page 7.
6.
See “Removing the Hard Disk Drive Module” on page 8.
7.
See “Removing the SSD Module” on page 9.
8.
See “Removing the RTC Battery” on page 9.
9.
See “Removing the Keyboard” on page 12.
10.
See “Removing the WLAN Board Module” on page 13.
Step
Size (Quantity)
Color
Torque
1
M2 x L4 (1)
Black
1.6 kgf-cm