Acer Altos R720 Series, Инструкция по установке и настройке, Страница: 96 / 104

Altos R720 Installation Configuration Guide 86
NetWare Loadable Modules: (optional)
10.
Please press INSERT key to insert the onboard Intel 82563EB Gigabit
Ethernet driver. After the drivers are successfully loaded, please select
Return to driver summary.
11.
Then, you would see the following message. Please select Continue.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types Driver names
------------------------- --------------
Network boards: E1000E, E1000E
Network Loadable Modules: (optional)
12.
Please follow the normal procedures to complete the NetWare 6.5
installation.
NetWare 6.5 SP5 Installation (with integrated SAS hardware
RAID 2)
Below information describes how to manually install NetWare 6.5 (Support
Pack 5 overlay CD) on Altos R720 with integrated SAS hardware RAID 2.
Drivers Required
For NetWare 6.5 SP5 installation with integrated SAS hardware RAID 2, the
following device drivers are required.
Device Version EasyBUILD Version
Integrated SAS
hardware RAID 2
1.04.04 EasyBUILD 8.0 build 200 (or later)
Onboard Chipset N/A OS built-in
Onboard Gigabit
Ethernet
10.45 EasyBUILD 8.0 build 200 (or later)
Onboard VGA N/A OS built-in
Onboard USB 2.0 N/A OS built-in
Installation Tips
NOTE. You need to apply the integrated SAS hardware RAID 2 and NIC driver
during the installation. If you do not have the optional internal USB floppy
drive, you need an external USB floppy drive.
1.
Make a driver diskette for integrated SAS hardware RAID 2 and onboard
Intel 82563EB Gigabit Ethernet from EasyBUILD 7.1 build 100.
2.
Boot the system from the NetWare 6.5 SP5 OS CD.
3.
At Welcome to the NetWare 6.5 server installation page, select Manual to