Acer Altos G310 MK2 Series Скачать руководство пользователя

Страница: 128 / 136

Appendix A: Embedded SATA RAID Technology for the Altos G310 Mk2

116

One of the hard drives in
a mirrored (RAID 1) array
has failed.

Replace the failed drive with another drive
that has the same or greater capacity.

You insert a new drive
with no configuration
into the slot which is
already part of a
mirrored (RAID 1) array.

Press any key to enter the BIOS Configuration
Utility (Ctrl-E) to configure the new drive.
Mark the drive as one of the following:

•

Failed - If the AutoRebuild option is
disabled in the configuration utility

•

Rebuilding - If the AutoRebuild
option is enabled in the
configuration utility

You insert a new drive
with no configuration
into the slot which is
already part of a striped
(RAID 0) array or there is
a striped (RAID 0) array
by itself in the system.

Press any key to enter the BIOS Configuration
Utility (Ctrl-E) to configure the new drive.

Problem

Suggested solution

Содержание Altos G310 MK2 Series









































































































































Результаты поиска

Содержание Altos G310 MK2 Series

Отзывы:

Похожие инструкции для Altos G310 MK2 Series

Бренды по названию

Популярные бренды

Acer Altos G310 MK2 Series, Руководство пользователя

Результаты поиска

Содержание Altos G310 MK2 Series

Отзывы:

Похожие инструкции для Altos G310 MK2 Series

Бренды по названию

Популярные бренды