background image

 Altos 500 Series User’s Guide

1-20

1.10

Server Management Features

1.10.1 Advanced Server Manager (ASM Pro)

ASM Pro is a server management tool based on the Simple Network Management
Protocol (SNMP).  It detects server problems related to a processor thermal
condition, 

±

12V/

±

5V/3.3V/1.5V detection, or calculating PCI bus utilization.

This feature is designed primarily for server supervisors and management
information system (MIS) personnel to help them detect errors or potential trouble
spots in their network servers through a single management station.

ASM Pro consists of two major parts:

 

ASM-Station - a Windows-based monitoring station that communicates with
the ASM-Agents.

 

ASM-Agent(s) - the individual servers managed by the ASM-Station.

Refer to the ASM Pro User’s Guide for more information.

1.11

Error Messages

Do not continue using the computer if you receive an error message of any type.
Note the message and take corrective action.  This section explains the different
types of error messages and corresponding corrective measures.

There are two general types of error messages:

 

Software

 

System

Содержание Altos 500 Series
































































































































Отзывы: