Acer AL2051 Скачать руководство пользователя страница 25

Страница: 25 / 54

Logo

When the monitor is power on, the LOGO will be showed in the center, and disappear slowly.

How To Optimize The DOS-Mode

Plug And Play

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the

monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional

information about its display capabilities.

The DDC2B is a bi-directional data channel based on the I²C protocol. The host can request EDID information over

the DDC2B channel.

This monitor will appear to be non-functional if there is no video input signal. In order for this monitor to

operate properly, there must be a video input signal.

This monitor meets the Green monitor standards as set by the Video Electronics Standards Association (VESA)

and/or the United States Environmental Protection Agency (EPA) and The Swedish Confederation Employees

(NUTEK). This feature is designed to conserve electrical energy by reducing power consumption when there is no

video-input signal present. When there is no video input signals this monitor, following a time-out period, will

automatically switch to an OFF mode. This reduces the monitor's internal power supply consumption. After the

video input signal is restored, full power is restored and the display is automatically redrawn. The appearance is

similar to a "Screen Saver" feature except the display is completely off. Pressing a key on the keyboard, or clicking

the mouse restores the display.

Using The Right Power Cord

The accessory power cord for the Northern American region is the wallet plug with NEMA 5-15 style and is UL

listed and CSA labeled. The voltage rating for the power cord shall be 125 volts AC.

Supplied with units intended for connection to power outlet of personal computer: Please use a cord set consisting

of a minimum No. 18 AWG, type SJT or SVT three conductors flexible cord. One end terminates with a grounding

type attachment plug, rated 10A, 250V, and CEE-22 male configuration. The other end terminates with a

molded-on type connector body, rated 10A, 250V, having standard CEE-22 female configuration.

Please note that power supply cord needs to use VDE 0602, 0625, 0821 approval power cord in European

counties.

Содержание AL2051























































Результаты поиска

Содержание AL2051

Отзывы:

Похожие инструкции для AL2051

Бренды по названию

Популярные бренды

Acer AL2051, Руководство по обслуживанию

Результаты поиска

Содержание AL2051

Отзывы:

Похожие инструкции для AL2051

Бренды по названию

Популярные бренды