background image

 
 

PRODUCT 

 

Note

Save the original box and packing material for future shipping needs.

 

Contents 

LCD Monitor and Base. Please refer to 

Quick Setup

 

The Accessories in this LCD Monitor Model. Please refer to 

Quick Setup

Features

 

High Brightness. 

Light in weight. 

Fast response time. 

Stereo Speaker. 

Power Saver. 

Low electromagnetic wave and power saver. 

Kensington security lock. 

Safety certifications. 

Power saver

 

 

 

Power control system, also called 

(Power Saver)

, is installed inside the LCD Monitor.

If the monitor has not been used for a certain period of time, the system will turn the 
monitor to low voltage mode to save power. Slight moving or any click will return to the 
original image.   

The VGA card inside the computer handles 

Power Saver

. You can use computer 

software to set the function. 

The LCD Monitor is compatible with EPA ENERGY STAR and NÜTEK if used with a 
VESA DPMS computer. 

To save power, turn off the power of the LCD monitor when not in use. 

Plug & play 

 

 

The new 

VESA Plug and Play

function is used which eliminates the complicated and 

time-consuming installation process. 

You can use the 

Plug and Play

 system without encountering usual installation 

problems. Your computer system can easily identify and automatically adjust the 
monitor. 

The LCD Monitor uses 

Display Data Channel (DDC) 

to send

 Extended Display 

Identification Data (EDID) 

to the computer system, so the computer system can be 

set to monitor auto adjust.   

E

n

g

lis

h

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Содержание AL1703










Отзывы: