manualshive.com logo in svg

Acer AcerPower Sc, Руководство пользователя

Поделиться
Скачать
Acer AcerPower Sc Скачать руководство пользователя страница 58

 4 Upgrading your computer

48

Installing additional memory

The two 168-pin sockets onboard support Synchronous Dynamic 
Random-Access Memory (SDRAM)-type DIMMs.  You may install 32-MB, 
64-MB, 128-MB, 256-MB, or 512-MB (single and double density) DIMMs 
for a maximum of 1-GB memory.  

The SDRAM DIMMs should work under 3.3 volts only; 5-volt memory 
devices are not supported.  This system board supports both PC-100 
(100MHz) and PC-133 (133 MHz) SDRAM.  However, they cannot be 
used at the same time in a computer.  Please contact your dealer for 
qualified DIMM vendors.

Caution: 

Do not use both PC-100 (100 MHz) and PC-133 (133 

MHz) SDRAM together. Such a combination might cause your 
system to malfunction. 

Each of the DIMM sockets is independent from the others.  This 
independence allows you to install DIMMs with different capacities to 
form different configurations.

Installing a DIMM

1

Open the clips on the socket.

2

Align the DIMM with the socket.  

3

Press the DIMM into the socket until the clips lock onto the DIMM. 

APSC-ug-en.book Page 48 Friday, October 5, 2001 9:39 AM

Содержание AcerPower Sc





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды