manualshive.com logo in svg

Acer AcerPower Sc, Руководство пользователя

Поделиться
Скачать
Acer AcerPower Sc Скачать руководство пользователя страница 29

19

Caution: 

Make sure that the CD is properly inserted before 

closing the CD tray.  Improper insertion may damage both the CD 
and the CD-ROM drive. 

3

Gently close the tray.

To take care of your CDs:

•

Keep your CDs in a disk case when not in use to avoid scratches or 
other damage.  Any kind of dirt or damage can affect the data on 
the disc, impair the disc lens reader on the CD-ROM drive, or stop 
the computer from successfully reading the disc.

•

When handling CDs, always hold them by the edges to avoid 
smudges or fingerprints.

•

When cleaning CDs, use a clean, dust-free cloth and wipe in a 
straight line from the center to the edge.  Do not wipe in a circular 
motion.

•

Clean your CD-ROM drive periodically.  You may refer to the 
Cleaning Kit for instructions.  Cleaning Kits can be purchased in 
any computer or electronics shop. 

Hard disk drive

Your computer is preinstalled with a high-capacity Enhanced-IDE (E-
IDE) hard disk drive.  If you want to replace your hard disk or upgrade 
it, contact your dealer or a qualified service technician for support.

APSC-ug-en.book Page 19 Friday, October 5, 2001 9:39 AM

Содержание AcerPower Sc





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды