![background image](http://html.mh-extra.com/html/acer/acerbasic/acerbasic_user-manual_5706068.webp)
Setup Utility
58
User’s Guide
PCI/PnP System Configuration
The PnP/PCI System Configuration allows you to specify the
settings for your PCI devices.
PnP/PCI System Configuration
Page 1/1
PCI IRQ Setting ................................[ Auto ]
INTA
INTB
INTC
INTD
PCI Slot 1 .......................................... [--]
[--]
[--]
[--]
PCI Slot 2 .......................................... [--]
[--]
[--]
[--]
On-Board VGA................................... [--]
PCI IRQ Sharing ................................ [Yes]
VGA Palette Snoop ........................... [Disabled]
Plug & Play OS .................................. [Yes]
Reset Resources Assignment ............ [No ]
Onboard LAN Chip............................. [Enabled]
Onboard Audio Chip........................... [Enabled]
↑↓
= Move Highlight Bar,
→
←
= Change Setting
PgDn/PgUp = Move Screen, F1 = Help, Esc = Exit
PCI IRQ Setting
This parameter allows for auto or manual configuration of
PCI devices. If you use Plug and Play (PnP) devices, you
can keep the default setting
Auto
to automatically configure
PnP devices. If your PCI device is not Plug and Play, you
can manually assign the interrupt for each of the device.
Refer to your manual for technical information about
the PCI card.
Содержание AcerBasic
Страница 1: ...AcerBasic User s Guide ...