![background image](http://html.mh-extra.com/html/acer/acerbasic/acerbasic_user-manual_5706059.webp)
Setup Utility
User’s Guide
49
POWER SAVING OPERATION MODE
This parameter specifies which type of power saving the
computer enters into, either Traditional or QuickStart. In
Traditional power saving mode, power saving timers are set
and these allow the computer to begin power saving during
inactivity timeouts; QuickStart power saving mode allows
you to put the computer to sleep and wake it up using the
On/Off button on the front panel.
IDE HARD DISK STANDBY TIMER
This parameter allows the hard disk to enter standby mode
after inactivity of 1 to 15 minutes, depending on your
setting. When you access the hard disk again, allow 3 to 5
seconds (depending on the hard disk) for the disk to return
to normal speed. Set this parameter to
Off
if your hard disk
does not support this function.
MONITOR POWER SAVING TIMER
This parameter sets your display monitor to standby mode.
Any keyboard or mouse action returns the monitor to
normal operation. The monitor must comply to the VESA
DPMS standard.
SYSTEM STANDBY TIMER
This parameter sets the computer to a "fast-on" power
saving mode. It automatically enters into the standby mode
after a specified period of inactivity. Any keyboard or
mouse action, or any enabled monitored activities occurring
through the IRQ channels resume computer operation.
Содержание AcerBasic
Страница 1: ...AcerBasic User s Guide ...