manualshive.com logo in svg

Acer AB2x280 F1, Руководство по обслуживанию

Поделиться
Скачать
Acer AB2x280 F1 Скачать руководство пользователя страница 87

Chapter 9

79

Parity Check 1 nnnn

Parity error found in the system bus. BIOS attempts to locate the address 
and display it on the screen. If it cannot locate the address, it displays 

????

. 

Parity is a method for checking errors in binary data. A parity error indicates 
that some data has been corrupted.

Parity Check 2 nnnn

Parity error found in the I/O bus. BIOS attempts to locate the address and 
display it on the screen. If it cannot locate the address, it displays 

????

.

Press <F1> to resume, <F2> to Setup, 
<F3> for previous 

Displayed after any recoverable error message. Press <F1> to start the 
boot process or <F2> to enter Setup and change the settings. Press <F3> 
to display the previous screen (usually an initialization error of an 

Option 

ROM

, i.e., an add-on card). Write down and follow the information shown 

on the screen.

Press <F2> to enter Setup

Optional message displayed during POST. Can be turned off in Setup.

PS/2 Mouse:

PS/2 mouse identified.

Run the I2O Configuration Utility

One or more unclaimed block storage devices have the Configuration 
Request bit set in the LCT. Run an I2O Configuration Utility (e.g. the SAC 
utility).

System BIOS shadowed

System BIOS copied to shadow RAM.

UMB upper limit segment address: 

nnnn

Displays the address 

nnnn 

of the upper limit of 

Upper Memory Blocks

, 

indicating released segments of the BIOS which can be reclaimed by a 
virtual memory manager.

Video BIOS shadowed

Video BIOS successfully copied to shadow RAM.

BIOS Message

Description

Содержание AB2x280 F1































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды