Acer AB2x280 F1 Скачать руководство пользователя страница 77

Страница: 77 / 94

Chapter 8

Security

The BIOS provides a Supervisor and a User password. If you use both passwords, the Supervisor password
must be set first.

Supervisor Password

: This item indicates if a supervisor password has been entered for the system. Clear

means such a password has not been used and Set means a supervisor password has been entered for the
system.

User Password

: This item indicates if a user password has been entered for the system. Clear means such a

password has not been used and Set means a user password has been entered for the system.

Change Supervisor Password

: Select this feature and press <

Enter

> to access the submenu, and then type

in a new Supervisor Password.

User Access Level

: (Available when Supervisor Password is set as above) Available options are

•

Full Access - grants full User read and write access to the Setup Utility.

•

View Only - allows access to the Setup Utility but the fields cannot be changed.

•

Limited - allows only limited .elfis to be changed such as Date and Time

•

No Access - prevents User access to the Setup Utility.

Change User Password

: Select this feature and press <

Enter

> to access the submenu , and then type in a

new User Password.

Clear User Password

: (Available only if User Password has been set) This item allows you to clear a user

password after it has been entered.

Password Check

: If set to

Setup

, a password is required to enter the Setup Utility. If set to

Always

, the

system will prompt for a password at bootup.

Boot Sector Virus Protection

: When

Enabled

, the BIOS displays a warning when any program (or virus)

issues a disk format command or attempts to write to the boot sector of the hard disk drive.

Содержание AB2x280 F1































































































Результаты поиска

Содержание AB2x280 F1

Отзывы:

Бренды по названию

Популярные бренды

Acer AB2x280 F1, Руководство по обслуживанию

Результаты поиска

Содержание AB2x280 F1

Отзывы:

Бренды по названию

Популярные бренды