2.4.7 PS/2 Mouse Port (5-pin MOUSE)
The system will direct IRQ12 to the PS/2 mouse.
2.4.8 Serial Port (Two 10-pin COM)
2.4.9 Printer Port (26-pin PRINTER)
You can enable the parallel port and choose the IRQ through the “Onboard Parallel Port” setting in Integrated Peripherals
of the COMS SETUP UTILITY.
2.4.10 USB Connectors (Two 5-pin USB)
You can attach USB devices to the USB connector.
2.4.11 Wake-up on LAN Connector (3-pin WOL)
The connector powers up the system when a wakeup packet or signal is received from the network . This feature
requires the
Wake up on LAN
function in BIOS is set to Enabled and
that your system has an ATX power supply with at
least 720mA +5V standby power.