ACEK9 Hot-N-Pop Pro, Руководство по установке

Страница: 8 / 19

7
STEP 6 Light Bar/Strobe Alert Feature
“TIP”
Some Light/Siren Controllers allow for programming of both light and siren activation off one input.
A Choice of positive or negative output is provided.
AceK9 Wire Color: Green (-)
Green/Red (+)
Green
(-)
wire provides a negative output (Low Current Ground Trigger 0.75A)
Green/Red
(+)
wire provides a positive output (12V+ when triggered Fused at 15A Max)
Light Controler Input Method
.
Connection: Consult the instructions provided by the controller manufacturer for polarity
and programing.
Lights Using Standard 12V light methods
(+)
Lights activated by a switch or light controller's isolated Positive outputs.
Connection: Connect the Green/Red wire to the light side of the switch or controller.
(12V+ when triggered Fused at 15A Max)
STEP 7 Siren Alert Feature
AceK9 Wire Color: ( Violet - or Violet/Red +)
A Choice of Positive and Negative Outputs are provided.
Violet wire provides a negative output (Ground Trigger 3A Max)
Violet/Red wire provides a positive output (B+ when triggered Fused at 15A Max)
Never connect to wire of emergency vehicles high power siren speaker.
Siren using programmable input
.
Violet (-) or Violet/Red (+)
Connection
:
Most siren controllers provide a remote input to activate a siren tone
.
Consult the instructions provided by the controller manufacturer for polarity and programing.
Siren using a 12V car alarm speaker
. (+)
Connection: Violet/Red wire to positive side of 12V siren speaker. Attach the speaker’s
ground wire to a good ground.