Aceex 11n Wireless Router, Руководство пользователя

Страница: 31 / 60

30
the network is WAN or LAN.
Radius Server Address: Enter IP address of radius server.
Radius Server Port: Enter port number of radius server. Default is 1812.
Radius Server Key: Enter a string for certificating.
WDS Setting
WDS:
Restricted – WDS peers must be registered with AP router (by MAC addresses)
Bridge – AP router will function as a wireless bridge, merely forwarding traffic between access points, and will not
respond to wireless requests. The WDS peers must be manually stated and wireless stations will not be able to
connect to AP router.
Repeater – AP router will act as a repeater, interconnecting between access points. WDS peers can be
determined by the user (Restricted mode) or auto-detected (Lazy mode)
WDS Encryption Type:
Lazy – Automatic detection of WDS peers. When a LAN user searches for a network, AP router will attempt to
connect to WDS devices in its vicinity.
When the Authentication Mode is set as Open, Shared, or WEP auto; WEP is the only WDS encryption type.
When the Authentication Mode is set as WPA Personal or WPA2 Personal, the WDS encryption type can be TKIP
or AES.
WDS WPA/WPA2 Pre-Shared Key:
Specify the pre-shared key to secure WDS, if your authentication mode is set as WPA Personal or WPA2
Personal.
WDS MAC List: Specify the destination MAC address device. The MAC address filter tunneling lets you select
exactly which stations should have access to your network.
Note: When WDS is enabled, the WPA/WPA2 enterprise support will be unavailable.
AP Client
The AP client feature allows the AP to effectively become a wireless client of remote AP. When the AP client is
enabled, both the wired and wireless clients can access the remote AP through this AP client.
Note:
1. When AP Client is enabled, the WPA/WPA2 enterprise support will be unavailable.
2. Please ensure the channel of the AP is the same as the remote AP which this AP client will connect to.