m.
Change PIN
n.
Bluetooth (not chooseable with this model)
III.
Measurement set.
k.
Measurement unit
l.
Passive mode (on/off)
m.
Limits level (set the measurement limits)
n.
Blow criteria (setting of the minimum breathing volume and minimum blowing time)
o.
Sampling type (Setting of 2 possible types of sampling: 1. Fixed volume = sampling is
finished when the minimum volume is reached; 2. End of breath = sampling is
finished at the end of the exhalation)
p.
Backlight (on/off)
q.
Test count option (Since last CAL = a number of tests after the last calibration;
Lifetime total = total number of ever with the device done tests; OFF = function off )
r.
CAL required No. (setting of the calibration period)
s.
Tachograph (connection to the tachometer of a vehicle, this function is optional and
not chooseable with this model)
t.
Measurement mode (Normal or Fast, default: Normal; to get exact test results you
always should use „Normal“; with mode „Fast“ you do not need a mouthpiece for a
test, just use the open container on top of the device. Be aware that in this mode the
test result is more imprecisely and not shown as number on the display but only with
the letter „P“ (Pass) and „F“ (Fail).
IV.
Calibration (this menu must only be used by the ACE customer service! )
h.
Last maintenance
i.
Accuracy CHK date (date/time, the device saves max. values)
j.
Calibration (for service tasks only)
k.
Accuracy check (check of accuracy , for service tasks only)
l.
Pressure Cal. (for service tasks only)
m.
Set last CAL date (for service tasks only)
n.
Set last ACC date (for service tasks only)