Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 169 / 418

Installation and Operation Manual Chapter 4 Configuration
ACE-3105, ACE-3205 Ver. 5.2 Configuring for Operation 4-79
• Up to 8 CES connections per port are supported in structured mode.
• Up to 32 CES connections are supported.
• The total XC number includes both ATM XC, CES XC and inband ATM router
interfaces.
• A traffic descriptor with a CBR-CES service category is automatically created
when CES XC is defined.
• A CES connection cannot be created if the number of configured TDs has
reached the maximum.
³
To delete an existing CES XC:
1. In XC ID, enter the ID number of the group that you want to delete.
2. Press R (remove).
A confirmation message appears: "
Are you sure? (Y/N)
"
3. Press Y.
The XC is deleted.
Configuring the VCL Interface
This section instructs you on configuring a VCL interface connection.
³
To access the VCL interface connection menu:
•
From the ATM menu (see
Figure 4-57
), select VCL Interface.
The VCL Interface menu is displayed.
ACE-3205 – RAD Data Communications
Configuration> Applications> ATM> VCL Interface
1. Port type ... (IMA group)
2. Port/group number ... (1)
3. VPI > (0)
4. VCI ... (32)
5. Out TD ... (1)
6. OD ... (1)
>
Please select item <1 to 10>
ESC-previous menu; !-main menu; &-exit
Figure 4-57. VCL Interface Menu
Table 4-50. VCL Interface Parameters
Parameter Description Possible Values
Port type The channel’s port type ADSL2+
IMA-group (SHDSL type)
Port/group number The channel’s port number
Note:
ADSL: 1–2
SHDSL IMA group:
Note