Ace Sports Maxxam 150 2R, Руководство по обслуживанию

Страница: 71 / 79

THROTTLE & BRAKE PEDAL
• Remove throttle, throttle pedal and axle nut, check for signs of wear.
Replace if wear is present.
• Fill with grease in order to make the throttle & brake pedal swing more
flexibly before installation.
A-ARMS
• Grease the grease fittings of upper & lower A-arm, FR.
wheel periodically
• Remove bolt of upper & lower A-arm, FR. wheel
• Check the nylon bushing of upper & lower A-arm, FR. wheel
for wear. Replace immediately if wear is present.
STEERING KNUCKLE SUPPORT
• Remove rubber dust cover of the knuckle support.
• Check the grease of ball joint. Clean it if it is dirty and lled with grease.
• Replace the steering knuckle support if the ball joint is loose or steering
TIE ROD
Tie rods should be checked for ease of movement in their full rotation.
• Remove protective boot and apply grease.
• Check tie rod ends periodically for tightness at their adjusting nuts.
• Always use a new cotter pin after removal.
REVERSE ADJUSTMENT
1. Press down the reverse lever to the “FW” position so that the units can move forward. Pull back
the level to “BW” so that the units can move backward.
2. In the forward position there should be about 1/4 inch play in the cable for the correct adjustment.
If adjustment is required, use adjusting not on top of the reverse gear box.
6