1
English
1
English
-12
1.
You also can continue to pressing the side of the speed control button to
quickly increase the speed.
2.
If you would like to decrease the speed, just follow the above steps by replacing
the side with the side of the speed control button. The speed will reach its
minimum speed setting of 1.
SETTING THE SPEED CONTROL MEMORY
The speed control has a memory function that can be set to remember the previous
speed setting. By using this feature, the tool will automatically run at the previously
speed setting when the tool is turned on.
1.
To memorize the current speed of the tool. Turn on the tool and speed up it until
reaching the speed setting you require. Press the power on/off button for about 2
seconds, and then the LCD display will show a steady
symbol.
1.
When the
symbol is displayed on the LCD display, you still can adjust the
speed setting of the tool by pressing the speed control button. But that means
any speed setting you select will be memorized in time.
2.
To check if the current speed setting of the tool is really memorized. Restart the
tool. Verify if the LCD display show the same information as figure below.
2.
To turn off the memory function of the tool - Press the power on/off button for
about 2 seconds, and then the
symbol on the LCD display will disappear.
NOTE
NOTE
