background image

TROUBLE SHOOTING CHECK LIST

  TROUBLE 

CAUSE 

REMEDY

Jack will not lower

completely

Jack will not hold

weight

Jack will not lift

to full height

Weak lifting

Jack will not lift

load

1. Air in hydraulic system

2. Release valve stuck

  Release valve in open

  position

1. Oil level low

2. Air in hydraulic system

1. Air in hydraulic system

2. Dirty oil

3. Release valve not

  completely closed

1. Excessive weight

2. Release valve in open

  position

3. Oil level low 

1. Purge air from hydraulic system

2.Transfer weight load and clean

  valve

  Close release valve tightly

1. Fill to recommended level

2. Purge air from hydraulic system

1. Purge air from hydraulic system

2. Change oil. Use SAE 5W

3. Close release valve tightly

1. Decrease weight or change

  to higher capacity jack

2. Turn valve clockwise and tighten

3. Fill to recommended level

6

7

One Year Warranty

Every ACDelco product is inspected before leaving the factory. This product is warranted to be free of 

defects in material and workmanship. Test Rite Products Corporation, Official ACDelco Licensee, will 

replace free of charge, with the same or like item of equal value any item found to have defects in 

materials or workmanship during the first 1 year of customer ownership with proof of purchase. Proof 

of purchase must be either original or clear copy of your store receipt. Simply return item to store for 

replacement or call 1-800-592-8665 for a return authorization number. This warranty gives you specific 

legal rights and you may also have other rights which may vary from state to state. ACDelco, 

ACDelco Emblem and the ACDelco related graphics are General Motors Trademarks used under 

license to and distributed by Test Rite Products Corporation, 1900 S. Burgundy Place, 

Ontario, CA. 91761 U.S.A. Made in China.

For Repair Or Replacement Parts: 

Please call toll free 1-800-592-8665, Monday through Friday between the hours of 8:00 AM to 8:00 PM 

(Eastern Standard Time). Replacement Parts request can also be submitted via the web , 24 hours daily 

at www.americancustomerservice.com. In all correspondence, please include model #, part #, part 

description and quantity required. Name, Shipping Address and Day Time Telephone number, including 

area code, are required to process your parts shipment request.

34705

Gato de bastidor bajo 

para transmisiones. 

Gran resistencia 

1/2 tonelada (1,000 Libras)

Instrucciones de Operación

y Precauciones Para el Usuario

Precaución:

 

Antes de usar este producto, lea este manual y siga todas las Reglas de 

                  Seguridad e Instrucciones de Operación.

ACDelco, el emblema de ACDelco y los gráficos relacionados a ACDelco son marcas 

registradas de General Motors usadas debajo de licencia y distribuidas por

Test Rite Products Corporation, 1900 S. Burgandy Place, Ontario, CA  91761 U.S.A. 

Содержание 34705







Отзывы: