Page 13
Once the instrument has achieved a stable flow rate, it will alternate between
the ppm, air flow rate and stabilization screen as described previously. At
this point, you may press SELECT to go to the status screens and adjust
the ppm as described earlier. If the flow rate changes significantly during
this period, the instrument will attempt to re-stabilize at the new flow rate.
The instrument operates identically to the diffusion mode at this point.
WARNING: Do not adjust the flow rate to more than 0.0 LPM while the
Cal 2000 is attached to a sample draw unit or damage may occur to
the instrument. Also, do not attach the Cal 2000 to pumps drawing
more than 5 LPM.
