Accutron Ultra PC %, Руководство пользователя

Страница: 19 / 28

19
3. CLEANING AND DISINFECTING THE FLOWMETER
Cleaning:
Clean flowmeter by wiping with moistened towel or spraying with disinfectant and
wiping surface. If the disinfectant does not contain a cleaning agent, use a mild
cleaner for this step.
Disinfecting:
Any of the following commercially available disinfectants can be used for
disinfecting the flowmeter surface:
Commercial Brand Name EPA Registration No. EPA Establishment No.
Lysol Brand II I.C. 777-72-675 777-NJ-2
Disinfectant Spray
EcoTru (Spray) 70791-1 034490-CA-001
CaviCide 46781-6 46781-MI-1
Microstat 2 Tablets 70369-1 69781-MN-01
Note: Reference the disinfectant's label instructions for appropriate
application procedures and inactivation of specific organisms. Care
should be taken not to let disinfectant seep into flowmeter’s sealed areas.
Barriers:
Barriers that are impervious to fluids are an acceptable alternative to chemical
disinfection of environmental surfaces. In some cases, barriers may be the best
way to prevent cross-contamination of equipment surfaces that are difficult to
clean or that may be harmed by disinfectants. Choose barriers that are large
enough to cover the area of concern, impervious to fluids such as blood and
saliva, and do not impede the use of the device or equipment they cover.
Change barriers between each patient.