Accutron Ultra PC %, Руководство пользователя

Страница: 11 / 28

11
PC UPRIGHT 4-CYLINDER PORTABLE
4-CYLINDER PORTABLE
SYSTEM ASSEMBLY
Identity the following components in the
4-cylinder portable system package:
• Flowmeter
• Portable Manifold (with DISS hoses
and adjustable mobile stand attached)
• “E” Cylinder Wrench (chain attached)
-7-
-6-
-5-
-4-
-3-
-2-
-1-
N2 O
O
2
Flush
U
L
T
R
A
PC
N O
2
-7-
-8-
-9-
-10-
-6-
-5-
-4-
-3-
-2-
-1-
O2
Off
FLO W
+ -
13 3/16" 16 9/16"
20 3/4"
31 5/16"
19"
O
2 Resuscita
tor
1. Mount the flowmeter to the portable manifold:
a) Remove the screw and washer from the top
of the flowmeter mounting post
(located on the manifold).
b) Slip the fixed loop (located at the back of the
flowmeter) over the mounting post.
c) Re-attach the washer and screw to the top of
the mounting post.
2. Attached the hoses to the flowmeter:
a) Run the nitrous oxide hose under the mani-
fold and attach it to the nitrous oxide DISS
fitting located on the back of the flowmeter.
b) Run the oxygen hose under the manifold and
attach it to the oxygen DISS Fitting located
on the back or the flowmeter.
Note: To avoid gas leaks, make certain all
hose attachments are securely tightened.
3. Connect the gas cylinders to the manifold’s
E-yokes:
a) Connect the nitrous oxide gas cylinders to
the nitrous oxide “E” yokes.
b) Connect the oxygen gas cylinders to the
oxygen “E” yokes.
4. To adjust the portable flowmeter unit’s height:
a) Loosen the black knob on the side of the
manifold.
b) Guide the stand post’s adjustable rod to
desired position.
c) Retighten the black knob.
Note: See page 23 for attaching rubber goods,
including scavenging circuit.
E-Yoke
(1 of 4)
Mobile Base
Flowmeter
Mounting
Post
Portable
Unit’s
Handle
Stand Post
Black Knob
(use to
make height
adjustments)
Regulator
(1 of 2)