8
separate subwoofer. Subwoofers often have only unbalanced high level inputs. The >
OUT 3
< can also
be used as subwoofer connection if you don’t operate in „Bi-Amping” mode, and only use one
balanced line output, e.g. >
OUT 1
<.
If you don’t own a power amplifier with balanced inputs, you can of course also connect a power
amplifier equipped with unbalanced inputs. Therefore please use the unbalanced line output >
OUT 3
<.
Using the rotary control
13
>
VOLUME
< you can set the volume of the reproduction device connected
to the PREAMP I
– MK 3
The volume can also be changed using the separate
remote control
ACCUSTIC ARTS
®
type RC - II.
Fig. 3
: Volume setting on the rotary potentiometer
VOLUME
Minimum
Maximum
Fig. 4:
ACCUSTIC ARTS
®
remote control
– RC II
reducing volume
increasing volume
5.5 Use of the mute function >
MUTE
<
This push-button is configured for short interrupts. By pushing this button all three line outputs >
OUT
1<
to
>OUT 3
< are turned off. This means that no music signal is being transmitted to the connected
power amplifier.
If you don’t operate the unit for a longer period, e.g. several hours or days, then the unit must be
switched off by pushing the mains switch
2
on the rear site of the unit.
