background image

 

 

Ensure that the appliance has sufficient air around it and avoid extreme temperature influences on 
the unit, especially direct sunshine and high humidity. 

 

 

Always

  disconnect  the  appliance  from  the  mains  power  before  carrying  out  any  changes  to  the 

cables or when cleaning the appliance. 

 

 

Protect  the  mains  cable  from  being  walked  on  or  pinched  particularly  at  plugs,  convenience 
receptables and the point where they exit from the appliance. 

 

 

The  mains  cable  (power  cord)  of  this  appliance  is  equipped  with  an  equipment  grounding 
conductor.  This  equipment  grounding  conductor  must 

never

  be  disconnected  or  taped  over.  In 

case any humming occurs please contact your authorized dealer. 

 

 

From time to time check the mains cable and the appliance for damages. Take care that the mains 
cable is not buckled or damaged by any house pets. 

 

 

Never

  move  the  appliance  by  pulling  the  mains  cable.  Make  sure  the  mains  cable  cannot  get 

caught in any way. 

Do not

 wind the mains cable around the appliance and do not bend it. 

 

 

Never

 use accessories which are not recommended by the manufacturer. They could constitute a 

danger to the user and risk to damage the appliance. 

 

 

Never

 operate the appliance with the housing open. 

 

 

To  clean  the  aluminium  housing  please  only  use  a  cloth  moistened  with  water  and  some 
detergent. 

Never

 use inflammable or chemically aggressive cleaning agents. 

 

 

In  the  event  of  a  defect,  please 

never

  attempt  to  repair  it  yourself.  Any  tampering  with  the 

appliance by an unauthorised person will make the warranty void. Please get in contact with your 
authorized dealer. 

 

 

Refer  all  servicing  to  qualified  service  personnel.  Servicing  is  required  when  the  appliance  has 
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled 
or  objects  have  fallen  into  the  appliance,  the  appliance  has  been  exposed  to  rain  or  moisture, 
does not operate normally or has been dropped. 

 

 

Replace  fuses  only  with  original  types  having  the  same  ampere  value,  the  same  voltage 
endurance  and  the  same  time-lag.  You  can  find  the  corresponding  value  in  chapter 

5.7

  of  this 

instruction manual. 

 

 

Never

 bypass a fuse. 

 

 

No user-serviceable parts inside. 

 
 
 

3  Unpacking 

 
 
Great  care  must  be  exercised  when  unpacking  the  unit.  Carefully  store  the  transportation  packaging 
for the possibility of further use. If you have a claim on the warranty, always use the original packaging 
for  any  necessary  transportation.  Transportation  without  this  packaging  can  lead  to  damage  to  the 
housing. 
 
Please check, if the following items are included: 
 
1 x AC mains cable (type depends on your country) 
1 x Aluminium remote control 

– RC II 

2 x batteries for the remote control 
1 x replacement fuse (type depends on your mains voltage) 
 

Содержание CD-PLAYER I (MK 3)











Отзывы: