Master Level Control:
The Master Level control, situated
at the bottom right of the amplifier
panel, controls the overall output
level of the amplifier. This control
should be used at any level to
produce the required output level.
Treble/Mid/Bass:
These yellow knobs provide 3
bands of tone control. Turning any
knob anti-clockwise will reduce the
level of that band, Treble, Mid or
Bass, rotating it clockwise increases
the level in that band. Note that
increasing these controls could
cause overload, if this happens
simply reduce the level by
decreasing the Level using the
White knobs at the top of the
panel.
Reverberation:
There are 16 different types of
reverberation available on each
channel. It has to be the same type
of reverberation on each channel
but the level of this reverberation
can be adjusted individually on
each channel from zero to max. The large Red knob, Effects Select, allows any
one of the 16 types of reverberation to be selected. There is a list of the reverb
styles associated with each number on the back of the amplifier. The Red
knobs, one on each side, allow the level of reverberation to be adjusted that is
applied to each channel. The smaller Red knob below the Effects Select knob
called Effects Parameter allows adjustment of one characteristic of each
individual reverberation. The parameter that is adjustable is indicated in the
next table, but it can be such characteristics as reverberation decay time, chorus
depth, flanger rate etc
3
