background image

Service and Repairs

Your ACCURIST watch is guaranteed against defects in materials and 

workmanship for a period of 2 years from the date of purchase. During 

this period, we will exchange or repair, at our discretion, any defective 

components free of charge.

IMPORTANT - Not covered by Guarantee

1. Batteries, straps and bracelets.

2. Damage caused by accident, misuse or lack of care.

3. Water penetrations except in watches marked as “Water Resistant”.

SERVICING AND REPAIRS UNDER GUARANTEE

Please post your watch, together with the Retailer’s Sales Receipt 

or proof of purchase, the completed Guarantee slip, and a brief note 

to explain the nature of the fault, by Registered Post or Recorded 

Delivery to the address shown. Do not send the presentation box as 

this will NOT be returned.

SERVICING AND REPAIRS OUTSIDE OF GUARANTEE

Available at a reasonable charge after an estimate has been sent by 

T.P. (UK) Ltd. Send your watch to us by Registered Post or Recorded 

Delivery to the address shown.

Important Note

It is important to identify your watch correctly. If, after reading this 

Instruction Guide, you have any further questions regarding the use, 

operation or adjustment of your watch, please call us during office 

hours on 0116 288 2500.

T.P. (UK) Ltd, Alexander House, Chartwell Drive, Wigston, Leicester 

LE18 2EZ

United Kingdom.

Содержание 7216











Отзывы: