26
CLEANING AND STORAGE
Cleaning the main device and the remote control
1) Turn unit off. Remove USB if device has been
charging.
2) Clean the device after use with a soft, slightly
moistened cloth and wipe gently.
n
Do not use chemicals (like thinner, benzene).
n
Do not let water get into the internal area.
Note:
n
This device and accessories does not require
sterilization.
Cleaning the electrode pads
1) Turn the power off
2) Remove pads from device.
3) Wash the pads when the adhesive surface
becomes dirty and/or the pads are difficult to
attach.
n
Wash the pad softly with your fingertips under
slow running cold water for several seconds (do
not use a sponge/cloth/sharp object like a nail on
adhesive side, do not use detergents, chemicals
or soap).
4) Dry the pads and let the adhesive surface air-dry
completely (do not wipe with a tissue paper or cloth).
CAUTION:
n
The life of pads may vary by the frequency of
washing, skin condition, and storage state.
n
If the pad no longer sticks to your skin or the
pad is broken, immediately discontinue use and
obtain replacement pads as recommended by
the manufacturer.
n
Before applying the self-adhesive electrodes,
it is recommended to wash and degrease the
skin, and then dry it.
n
DO NOT turn on the device when the electrodes
are not positioned on the body.
n
Never remove the self-adhesive electrodes from
the skin while the device is still turned on.
