Manual Part # 800-1402-002 Rev K, 072418
Page 13 of 53
Battery Operation
When the Readout battery needs to be replaced, the battery icon will
appear in the lower left corner of the LCD. Press and hold the
DATUM
key for 6 seconds to display the Battery Voltage.
When battery voltage drops below 2.6v, the Readout will turn itself off until the
battery is replaced
.
Basic , 950, General Purpose,
Remove the screws in the upper right and lower left corners. Pull the cover off.
Remove the old battery(ies). Install a new CR123 or equivalent battery noting
the proper orientation. Replace the cover and screws.
In-Panel Readout
Remove the screws holding the back cover in place. Pull the cover off.
Remove the old battery. Reinstall a new CR123 or equivalent battery noting
the proper orientation. Replace the cover and screws.
+
–
–
+
