Accuprint AP42CL 8000, Руководство по обслуживанию

Страница: 64 / 134

10-2 94MS42 Rev.B1 S/W Ver 2.06
• Place the new frame flat on the tray. Line up and insert the Allen head
screws through the hinge into the frame. Make sure the frame is
1
/
32
" to
1
/
16
" above the top of the hinge to avoid the possibility of damaging the
glass, then tighten them down.
• Reinstall the inner frame (without the Mylar®) and close all cams.
End View
Bar
Hinge
Outer
Frame
Allen
Screw
1/32"
to
1/16"
• Loosen all the Allen head screws in the corners of the inner and outer
frames shown in the diagram.
• Tighten the outer frame Allen head screws in the order shown in the
diagram, 2 per corner.
• Tighten the inner frame Allen head screws in the order shown in the
diagram, 2 per corner.
1
2
3
4
6
7
5
8
• Lift the frame and push the gas shocks back onto the ball joints.
• Reinstall the safety clips into the ends of the gas shocks.