Accuprint AP42CL 8000, Руководство по обслуживанию

Страница: 59 / 134

94MS42 Rev.B1 S/W Ver 2.06 9-3
Work Lights
Note: The work lights are controlled by a rocker switch on the underside
of the right front corner of the nose cover.
Note: If the work lights are not turning ON, check the rocker switch
and power to the switch.
Note: The work lights receive their power from the autoformer in the
nose section
• To change the lamps the trays must first be moved to the center position.
This is done by:
• Press and hold the
S
button.
• Press the
G
button.
• Release both buttons when trays start moving.
• Just before the trays reach the center turn the power OFF.
• Lift the diffusion cover off of the light assembly.
• Twist the lamp to disengage it from the socket and remove it.
• Install in reverse order.
Nose Fans
Note: The nose fans are controlled by a rocker switch on the underside
of the right front corner of the rail cover.
Note: If the nose fans are not turning ON, check the rocker switch and
power to the switch.
• Remove the nose.
• Disconnect the power leads to the blower(s).
• Remove the blower(s).
• Install in reverse order.
Cleaning or Replacing Nose Filters
• Slide the filters toward the front of the unit and out of the brackets.
• Clean metal filters with water or environmentally safe solvent.