AccuEnergy AcuMesh, Руководство пользователя

Страница: 11 / 23

V: 1.2 Revised: 22-12-2017
PIN RS485 Description
1 TX/RX+ Positive Transmission Line
2 TX/RX- Negative Transmission Line
5 GND Ground
Power Connection
• Connection for the 7-30Vdc power adapter
DIP Switch
•
•
most devices only support half-duplex communication
Commission Button
• The commission button is used to reset the transceiver to its default settings when it
is pushed 4 times consecutively. It can be used when the transceiver is unable to con-
nect to the AcuMesh software. Once pushed 4 times the transceiver will contain the
-
ured.
If a AcuMesh-L is being used then the external power supply will be needed to power the
transceiver only if it is being connected by RS485. The terminals for the power supply are
labelled as '+' and '-' respectively.
The AcuMesh-K will have the following terminals and connectors:
www. .com
information@itm.com 1.800.561.8187