V: 1.0 Revised: 9-9-2015
Pg: 6
INSTALLATION CHECKLIST
You’ll need to confirm these details before successfully
completeing the installation of your AcuMesh system:
AcuMesh wireless system requires a
minimum of two transceivers to form the
network.
The RS485 network master device can be a
PC, PLC, data acquisition server or gateway,
e.g. AcuLink 710 Data Acquisition Server.
The slave devices can be our Acuvim II
series power meters or any other meter or
sensor with RS485 port. If it is the Acuvim II
meter, the AXM-Mesh transceiver module
should be used, for other devices the
standalone transceiver should be used.
Shop for Power Metering products online at:
1.877.766.5412
www.
PowerMeterStore
.com