V: 1.0 Revised: 9-9-2015
Pg: 13
4. SECURITY SETTINGS:
To write a setting to the transceiver press on the beside the parameter if it is
a read and write parameter.
To read or retrieve a parameter from the transceiver press the beside the
parameter.
ID Network ID:
The network or channel that the transceivers will communicate
in. All transceivers need to be configured with the same Network ID to
communicate with each other. Transceivers with different Network ID will not be
able to join the wireless network.
EE Encryption Enable:
This parameter is for enabling an encryption for the
transceiver in the network.
KY AES Encryption Key:
If the EE Encryption Enable parameter is enabled
then an Encryption key needs to be enter. This key must be set between 0-32
characters in Hexadecimal. Every transceiver must have the Encryption Key
correctly configured to join the network.
Shop for Power Metering products online at:
1.877.766.5412
www.
PowerMeterStore
.com