Accudata GVM-3, Руководство пользователя

Страница: 80 / 88

Accudata GVM-3 Ground Vibration Meter
Page Nº 77
6.5 Norm configuration.
1.
Norm to use: Select the Norm to use in this drop box.
2.
Frequency to use: In this drop box, select the frequency calculation method used by the Norm.
If the Norm specifies the method, the selection is not overridden.
3.
Frequency range: Select the frequency range for the FFT.
4.
FFX X Axis: Specify if a linear or logarithmic X axis is required.
5.
Show original wave: Use this check box to view the original wave in the reports (only applied
to Norms that mathematically transform the wave).
6.
Show transformed wave: Use this check box to view the transformed wave in the reports
(only applied to Norms that mathematically transform the wave).
1
2
3
4
5
6