Accucold CM411L Скачать руководство пользователя страница 6

 

 
 
Improper use of the grounded plug can result in the risk of electrical shock. If the power 
cord is damaged, have it replaced by an authorized service center. 

 

 

 

Models CM411LBI and CM421BLBI

 

Locate the unit away from direct sunlight and sources of heat (stove, heater, 
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may 
increase electrical consumption. Extremely cold ambient temperatures may also 
affect the unit's performance. 

: These built-in models are designed to be 

installed under the counter in a 21-inch opening. When installing, provide the 
following clearances to ensure the best operation and proper ventilation: 1/4” on 
both sides, 2” at the rear and 1/16” at the top. Be sure that airflow under the 
appliance is not blocked. If the appliance is going to be placed against a wall, if 
possible, leave extra space on the hinge side so the door can open wider than its 
width (to make it easier to remove shelves and crisper drawer).

 

 

Avoid locating the unit in moist areas. 

 

Plug the unit into an exclusive, properly installed and grounded wall outlet. Do not 
under any circumstances cut or remove the third (ground) prong from the power 
cord. Any questions concerning power and/or grounding should be directed 
toward a certified electrician or authorized service center. 

 

After plugging the appliance into a wall outlet, allow the unit to cool down for 2 to 
3 hours before storing items in the refrigerator compartment. 

Electrical Connection

 

 
 
 

This unit should be properly grounded for your safety. The power cord of this unit is 
equipped with a three-prong plug which mates with a standard three-prong wall 
outlet to minimize the possibility of electrical shock.  Do not under any circumstances 
cut or remove the third ground prong from the power cord supplied. For personal 
safety, this appliance must be properly grounded. 
This unit requires a standard 115-volt AC/60Hz electrical outlet with three-prong 
ground. Have the wall outlet and circuit checked by a qualified electrician to make 
sure the outlet is properly grounded. When a standard 2-prong wall outlet is 
encountered, it is your responsibility and obligation to have it replaced with a 
properly grounded 3-prong wall outlet. 
To prevent accidental injury, the cord should be secured behind the unit and not left 
exposed or dangling. 
The unit should always be plugged into its own individual electrical outlet which has 
a voltage rating that matches the rating label on the appliance. This provides the 
best performance and also prevents overloading house wiring circuits that could 
cause a fire hazard from overheated wires. Never unplug the unit by pulling on the 
power cord. Always grip the plug firmly and pull straight out from the receptacle. 
Repair or replace immediately any power cord that has become frayed or otherwise 
damaged. Do not use a cord that shows cracks or abrasion damage along its length 
or at either end. When moving the unit, be careful not to damage the power cord. 
 

Extension Cord: 

Do not use an extension cord. If the power cord is too short, have 

a qualified electrician or service technician install an outlet near the appliance. 

Содержание CM411L













Отзывы: