15
2. Equipment Overview (continued)
3.3 Functions Detection Sensitivity Adjustment (MG-UV-DD-
LEVEL)
The user has the option to adjust (increase or decrease) the sensitivity of the
detection functions based on their specific needs. The sensitivity can be
adjusted from 1-9, where 1 is the lowest sensitivity and 9 the highest
sensitivity to adjust.
To modify the setting values, keep pressing down the desired security
function for 3 seconds until the display shows the current sensitivity value
this function has. Use the numeric keypad to select the new value to set up,
then press START to validate the selection and return to the counting mode.
NOTE:
In case the unit frequently reports error messages, related to any
security feature (MG - UV - DD), consider verifying the current Sensitivity
setting for these functions. They might be too high for the current notes that
are being counted.
3.4 Display Brightness adjustment
The user might need to adjust (increase or decrease) the screen brightness to
make it easier to read the screen.
-
Press key # “7” (for 3 seconds) to enter into the BRIGHTNESS menu,
then press sequentially the “CURR” to increase or “DEN” to reduce
the display brightness until reaching the desired value.
-
Press START to validate the selection and return to count mode.
USD
MG:
UV:
4
3
LEVEL: 2
1
2
3
4
5
6
7
8
9
0
C
Batch
