AccuBANKER AB-5000 MG/UV, Руководство пользователя

Страница: 10 / 40

Parts
Par
ts
Hopper
Auxiliary Hopper Plates
UV Lamp Cleaning Shaft
Thickness Adjustment Screw
Stacker
Power Switch
Power Inlet
Fluorescent Detection Sensitivity Adjustment Lever
Place the notes to be counted in this compartment.
Aid to help position the notes correctly to be fed into the unit.
Built-in device that cleans the UV lamp.
Used to make the counting operation smooth.The thickness adjustment is factory defaulted (for more
information, refer to the Operation section, point 7).
The counted notes are stacked in this compartment.
Used to turn the power on or off.
The supplied power cord should be connected to the power inlet first.The other end should be
connected to the AC power outlet.
The fluorescent detection sensitivity can be adjusted by sliding this lever up or down (for more
information refer to the Operation section, point 10 a).