background image

 
 
 
 

Page 3 

 

 

Warranty 

 

Accu1Direct products are warranted to be free from defects in workmanship 

and materials for a period of five (5) years from date of purchase. 

 

  

The following restrictions apply:  

 

1) The warranty applies to products in normal use only. The product must be  
     serviced and maintained as described herein.  

2) If the product fails it will be repaired or replaced at the option of        
    Accu1Direct.  

 

3) All shipment/delivery charges are the responsibility of the purchaser.  

 

4) Warranty service claims are subject to factory inspection for product         
     defect(s). If during warranty evaluation it is determined that the machine        
     has been used in any way other than the purpose for which it was        
     designed, Accu1Direct reserves the right to void the warranty. 

 

5) All warranty claims must be made within the warranty period. This       
    warranty is non-transferrable. 

 

6) Note that the warranty does not apply if the product or product part is        
    damaged by accident, misuse, or has been tampered with in any way. 

 

7) Normal wear items (seals, filters, etc.) are specifically excluded from        
    warranty unless found defective by Accu1Direct.  

 

8) Blowers, gear boxes, and engines are covered under the warranty of the       
     manufacturers of those products.  

 

9) This warranty is exclusive and shall be in lieu of any other warranty,         
     expressed or implied, which may be available to the purchaser.  

 

Содержание 9700












Отзывы: