Accu-Steam EG24A, Инструкция по установке и эксплуатации

Страница: 4 / 48

Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702
PAGE 3
Plug this appliance into a properly grounded
electrical outlet of the correct voltage, size
and plug configuration. If they do not match,
contact a qualified electrician to determine
the proper voltage and size and install the
proper electrical outlet.
To avoid any personal injury or damage to
the unit do not pull this appliance by the
power cord.
To prevent any injury, discontinue any use if
power cord is frayed or worn.
To prevent any injury or damage this
appliance must be installed by a qualified
electrician.
To avoid any injury, turn the power off, unplug
from the power source and allow to cool
before performing any maintenance.
To avoid electrical shock or personal injury,
do not steam clean or use excessive water
on or pressure washer on this appliance.
This product has no “user” serviceable parts.
To avoid injury or damage to this appliance use
only Authorized AccuTemp Service Agents
and Genuine AccuTemp Replacement Parts
when service is required.
Genuine AccuTemp Replacement Parts
are specified to operate safely in the
environments in which they are used. Some
aftermarket parts or generic replacements
parts do not have the same specifications to
operate safely in AccuTemp equipment. It is
imperative that to use Genuine AccuTemp
Replacement Parts to avoid injury or damage
to this appliance.
Always disconnect from power source before
cleaning or servicing.
Any infield modification that bypasses the
built-in safety features will result in personal
injury or death.
This appliance must be properly grounded,
in accordance with all National, state or local
electrical codes.
This appliance has a totally unique design
and is constructed unlike any other griddle
on the market today. Any modification may
permanently damage the griddle.
Do not place any cooking utensils into the
openings of this appliance as there is the
possibility of personal injury or death.
This appliance must be level for proper
operation and to reduce possible damage .
This appliance is heavy, for safe handling,
the installer should obtain help as needed
or employ appropriate material handling
equipment to remove the appliance from
the skid and move to the final location in the
building.
Temperatures in and around the appliance
are very hot and can cause severe burns.
To avoid damage to the cooking surface of
this appliance do not use abrasive cleaners
such as a griddle stone or brick.
To avoid damage to the do not leave a
chlorine sanitizer in contact with the stainless
steel longer than 10 minutes.
To avoid severe burns slowly remove
the grease reservoir to avoid spilling the
contents. It is recommended to let it cool
before removing.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT: Read the following safety installation to avoid personal injury or death and to avoid
damage to the equipment or property
WARNINGS
CAUTIONS