Accu-Steam EG24A, Инструкция по установке и эксплуатации

Страница: 28 / 48

Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702
PAGE 25
Managers mode is used to setup initial operational parameters for the appliance prior to the first time of production use.
Manager’s mode
1. Entering Managers mode, press and hold the DOWN arrow key and the Asterisk key for about eight
seconds, to initiate the programming mode for changing controller operating function parameters. In Manager’s
mode, the first field displayed, on the four-digit display, will be the P# = 1 , DEFAULT COOK TEMP.
2. The first field displayed, on the four-digit display, will be the P# = 1 Default Cook Temp. (See Fig. 5)
3. To manage the parameters, use Up Arrow key and Down Arrow key to increment and decrement the
Parameter Number, and use Preset 2 key and Asterisk key increment and decrement the Parameter Value.
4. To change the default set temperature display refer to step 3 and set the selected value. ( See Fig.6)
5. When all changes are completed Exit the Managers mode and save the new parameters by pressing the Preset
2 key
Managers Mode
Mode P# LED1 LED2 LED3 Parameter Min Setting Max Setting Default Display
0 B B B Unit of Measure 0 = F 0 = C 0 (°F) 0/00
1 B B B Default Cook Temperature 200F
90C
400F
205C
350F
175C
350F
175C
2 B B B Ready Mode Display 0 3 0 2/00
Manager
Fig. 5
P#2
Value Default
Display Display when there is a ,
or momentary key press
Display when there is a key press
0 rdY Set Point Temperature Set Point Temperature
1 Set Point Temperature Set Point Temperature Actual Temperature
2 rdY rdY rdY
3 Set Point Set Point Temperature Set Point Temperature
Fig. 6
This chart illustrates the programming logic and program level indication
This chart illustrates details for Parameter 2 Mode Display